When part of your home loses power, a breaker won’t stay on, or the lights flicker every time the AC starts, you need the cause found, not just the symptom reset. Our Beverly Hills electricians troubleshoot the circuit, explain what’s wrong and give you an upfront price before fixing it, usually the same day.
Get a free, upfront quote
Tell us what you need and we’ll call you back, usually within the hour. Prefer to talk now?
Electrical problems we fix every week
- Breakers that keep tripping: usually an overloaded circuit, a short or ground fault, or a worn breaker. See circuit breaker replacement.
- Flickering or dimming lights: loose connections, an overloaded circuit, a failing dimmer or, when it’s whole-house, a problem at the panel or the utility connection.
- Dead outlets or switches: a tripped GFCI upstream, a loose backstab connection, or a failed device. See outlet and switch repair.
- Warm or discolored outlets and switch plates, or a buzzing sound: a loose or overheating connection. Stop using the circuit and call.
- Half the house without power: often a lost neutral or a failed main connection, which can damage electronics. Treat it as an emergency.
- Lights or appliances that work intermittently: loose splices in boxes, damaged wiring, or old cloth-insulated wire breaking down.
How we diagnose and repair
- Ask and look: what you’ve noticed, when it started, and what else is on the circuit.
- Test the circuit: we trace it from the panel to the device and measure voltage and load to find the fault rather than guess.
- Explain and quote: you get the cause, the fix and an upfront price. Nothing starts until you approve it.
- Repair to code: damaged devices, connections and wire sections are replaced, and the circuit is retested under load.
If the root cause is bigger than one circuit, such as an undersized panel, ungrounded wiring or an aging service, we’ll tell you plainly and price the options separately so you can decide.
What affects the cost of an electrical repair
Most repairs are priced once the problem is found. The main factors are how long it takes to locate the fault, access to the wiring (attic, crawlspace or finished walls), parts, and whether the repair needs a permit.
Repair visits carry a $60 service-call fee, which is waived when you go ahead with the repair. The electrician diagnoses the problem and quotes the repair on site before starting.
Repairs in Beverly Hills homes
Many Beverly Hills homes were built between the 1920s and 1960s and have been expanded since. The original circuits often carry far more load than they were designed for, and older connections loosen over decades of heat cycles. That’s why we check the whole circuit, not just the outlet that failed.
What you can safely check before you call
A few quick checks can save a service call, or help us diagnose faster when we arrive:
- Look for a tripped GFCI. One GFCI outlet in a kitchen, bathroom, garage or outdoors can cut power to several other outlets. Press RESET.
- Check the panel. A tripped breaker sits in the middle position. Switch it fully off, then on. If it trips again immediately, leave it off.
- Test with a different device. A lamp that won’t turn on may simply have a bad bulb or cord.
- Note the pattern. When does it happen? Which rooms? What else was running? This helps us find intermittent faults.
Don’t open the panel cover, touch wiring, or keep resetting a breaker that trips right away. Our guide on common electrical problems covers more of what’s safe to check yourself.
Repair or replace?
Many problems can be repaired: a loose connection re-terminated, a failed device replaced, a damaged section of cable spliced properly in a box. Some point to bigger issues. If we find brittle insulation throughout, an overloaded panel, or a circuit that has been patched many times, we’ll explain why a panel upgrade or rewiring may cost less over time than repeated repairs, and price both so you can choose.
What customers say
“My breaker was not working. They showed up on time as scheduled and did an excellent job in repairing my breaker. Very thorough and communicative electrician. High quality of work and a fair price paid.”
Helen Greene, Google review ★★★★★
Frequently asked questions
Is it safe to keep resetting a breaker that trips?
No. A breaker trips to stop overheating. Resetting it repeatedly hides the cause, which can be an overload, a short or a failing breaker. Have it diagnosed. Our guide on resetting a tripped breaker explains what’s safe to try first.
Why do my lights flicker when the AC or a large appliance turns on?
A brief dip is normal on a heavily loaded circuit. Noticeable flicker across several rooms points to an overloaded panel, a loose connection or a utility-side issue, and should be checked.
Can you repair old knob-and-tube or cloth wiring?
We can make individual repairs safe, but this wiring has no ground and degrades with age, so we usually recommend replacing it. See wiring and rewiring.
Do you offer same-day electrical repair?
Most repair calls in Beverly Hills are handled the same day. Call (424) 281-6513 to check today’s availability.
Why does my electrical problem come and go?
Intermittent faults usually come from loose connections that make contact some of the time, often in outlet boxes, light fixtures or splices. They tend to get worse, not better, so it’s worth fixing early.
Related services
- Circuit breaker replacement
- Outlet and switch repair
- Emergency electrician
- Electrical safety inspection
Areas we serve
- Electrician in Beverly Hills
- Electrician in Bel Air
- Electrician in Holmby Hills
- Electrician in Brentwood
- Electrician in Century City
- Electrician in West Hollywood
- All service areas
Book an electrician today
Call (424) 281-6513 — answered 24/7 — or book online and we’ll confirm your arrival window. You’ll get an upfront price before any work starts.
Get a free, upfront quote
Tell us what you need and we’ll call you back, usually within the hour. Prefer to talk now?